top of page

Load data for 5.6 x 50 R Mag. + .224 | 35gr | Impala LWHV LS

Recommended Powder(s):

5.6 x 50 R Mag. + .224 | 35gr | Impala LWHV LS

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 35gr | Impala LWHV LS
Bullet Weight:
35gr | 2.3g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.661" | 16.8mm
Caliber:
5.6 x 50 R Mag. load data
Case Length (l3):
1.968" | 50.0mm
Cartridge Length (C.O.L.):
2.365" | 60.1mm
Seated Depth:
0.264" | 6.7mm
Shank Seated Depth:
0.264" | 6.7mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
49313 psi | 3400 bar
LID:
LID_B2957_C915
Last updated:
2025-01-01

Load data for 36 loads in caliber 5.6 x 50 R Mag. with .224 | 35gr | Impala LWHV LS bullet and 18 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
90%
44266
90%
**81
99%
[ADI AR 2219]*
<<locked>>
92%
44150
90%
**45
93%
Accurate 2015
<<locked>>
97%
40988
83%
**56
95%
Alliant AR-Comp
<<locked>>
97%
36303
74%
**91
95%
Alliant Reloder-10x
<<locked>>
96%
43903
89%
**61
97%
Alliant Reloder-7
<<locked>>
88%
43192
88%
**83
97%
[Baschieri & Pellagri 106]*
<<locked>>
92%
44179
90%
**97
94%
[Hodgdon H4198]*
<<locked>>
89%
43192
88%
**27
92%
Hodgdon TrailBoss
<<locked>>
97%
29153
59%
**51
100%
IMR 4198
<<locked>>
94%
43874
89%
**25
97%
IMR 4227
<<locked>>
83%
43613
88%
**76
98%
Lovex S053
<<locked>>
84%
44092
89%
**93
100%
Norma 200
<<locked>>
91%
43627
88%
**38
97%
ReloadSwiss RS 14
<<locked>>
96%
28819
58%
**00
100%
ReloadSwiss RS 36
<<locked>>
83%
43120
87%
**99
98%
SNPE Vectan BA6 1/2
<<locked>>
88%
44295
90%
**38
100%
Vihtavuori N120 👍
<<locked>>
92%
43163
88%
**02
100%
Vihtavuori N130
<<locked>>
96%
42105
85%
**33
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33388
68%
**96
97%
[ADI AR 2219]*
<<locked>>
88%
38247
78%
**88
90%
[Accurate 2015]*
<<locked>>
88%
30937
63%
**74
90%
[Alliant AR-Comp]*
<<locked>>
89%
28790
58%
**32
91%
[Alliant Reloder-10x]*
<<locked>>
83%
29704
60%
**58
90%
[Alliant Reloder-7]*
<<locked>>
81%
35317
72%
**73
94%
[Baschieri & Pellagri 106]*
<<locked>>
85%
35244
71%
**78
90%
[Hodgdon H4198]*
<<locked>>
86%
39247
80%
**15
90%
Hodgdon TrailBoss
<<locked>>
81%
22858
46%
**54
100%
[IMR 4198]*
<<locked>>
81%
29994
61%
**22
92%
IMR 4227
<<locked>>
81%
40466
82%
**07
98%
Lovex S053
<<locked>>
81%
39827
81%
**91
100%
[Norma 200]*
<<locked>>
81%
32300
65%
**37
93%
ReloadSwiss RS 14
<<locked>>
81%
22597
46%
**06
100%
ReloadSwiss RS 36
<<locked>>
81%
40263
82%
**33
98%
SNPE Vectan BA6 1/2
<<locked>>
81%
37188
75%
**94
100%
Vihtavuori N120
<<locked>>
81%
31256
63%
**94
98%
[Vihtavuori N130]*
<<locked>>
84%
29892
61%
**89
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page